PT.PROFILTER INDONESIA Ruko G54 Commpark Kotawisata Cibubur 16968, Jakarta, Indonesia Phn : 62 21 84937329, 84937805 Fax : 62 21 84937906 Email : sales@profilterindonesia.com


Desal AG8040F Reverse Osmosis Membrane pix  large
Suez AG8040F GE Osmonics Reverse Osmosis Membrane
Code : AG8040F
Deskripsi :

Suez AG8040F GE Osmonics Reverse Osmosis Membrane

Kami adalah importir distributor agen dan supplier terlengkap untuk menyediakan berbagai kebutuhan spare part filter untuk keperluan industri dengan price harga terbaik

 

Element TFC:

·         The GE Desal AG8040F Dry, Flush Cut reverse osmosis elements are used for brackish water desalination.

·         The A-Series thin-film reverse osmosis membrane elements are characterized by high flux and excellent sodium chloride rejection.

·         GE Osmonics Desal AG8040F High Rejection Brackish Water reverse osmosis elements feature a FRP outerwrap and 27 mil feed spacers and is designed with flush end connections.

·         GE Desal AG High Rejection Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psig are desired.

·         These elements allow moderate energy savings, and are considered a standard in the industry.

 

Element Specifications

·         Model : AG8040F

·         Flow : 9200 GPD (34.8 m3/d)

·         Active Area : 350 ft2 (32.5 m3)

·         Avg. Rejection : 99.5%

·         Min. Rejection : 99%

·         Part Number : 1206779


Specifications are based on a 2000 mg/L NaCl solution at 225 psig operating pressure (1551 kPa), 77°F (25°C), 15% recovery, pH7.5 after 24 hours. Individual flux may vary +25%/ -15%.

 

Operating and Design Parameters
Membrane: Thin Film Membrane (TFM®)

Typical Operating 200 psig (1,379 kPa)

Pressure:

·         Maximum Pressure: 450 psig (3,103 kPa)

·         Maximum Temperature: 122°F (50°C)

Chlorine Tolerance: 1,000 ppm-hrs, dechlorination recommended

Optimum Rejection pH: 7.0 -7.5

Operating pH Range: 4.0 - 11.0

Cleaning pH Range: 2.0 - 11.5

Feed NTU: <1

Feed SDI: <3

Maximum Pressure Drop : 10 psig (69 kPa) per element, 50 psig (345 kPa) per vessel

 

 

Untuk permintaan penawaran silahkan hubungi 

 

PT PROFILTER INDONESIA 

Ruko Blok G/54 – Gudang A/01 

Jl.Canadian Broadway 

Kawasan Pergudangan Commpark – Kotawisata – Cibubur  

Mobile : 081385066789  

Jumlah :


 




Ada pertanyaan tentang produk?
Hubungi :

Hubungi via YM